The Best Tile Cutter Reviews In 2019

Tiles are very fragile. One wrong move and it can shatter or incur cracks. And this is what we are trying to avoid. We cannot emphasize enough how important to choosing a sharp tile cutter is to get that accurate and precise cut. However, to choose the best tile cutter for you, you must consider a few things first.

So today, we are featuring a buying guide on how to find the best tile cutter for you. We included several things to consider when buying a tile cutter and some reviews to help jump start your hunt for the best tile cutter.


Buying a tile cutter should be treated with utmost care. It is okay to be as meticulous as possible with the type or material of tile cutter you would buy. This is because different tiles have different textures.

Some tiles might be a bit more fragile than others. Or in contrary, some might need more power to get them cut. Also, they also vary in sizes. However, these aren’t all the factors you need to consider.

Here are some more things to look into before buying your tile cutter:

1. Type of tiles you will be cutting

Just as we mentioned earlier, tiles have different textures. Whether you choose marble, ceramic or porcelain, is important to take note of. If you prefer the traditional ceramic tiles, it won’t be that hard to cut. Ceramic tiles are not as tough compared to other types of tiles.

Unlike porcelain or granite tiles that are very hard, those two types would probably need a motorized saw with a unique blade just to get a precise, clean cut. The blade should probably be no smaller than 7 inches just to get the job done.

Any less than this or even using a manual tile cutter would end up taking more time than only just using a motorized one.

2. Size of your Job

The size of your jobs also matters a lot. The size of the tiles you will be cutting and the floor area of the place you will be using the tiles for, specifically are what you need to take note of.

Is it for a room? A bathroom? Do you have to cut a specific shape of tile to fit it perfectly in the place? For instance, is it going to be a U or L shape? Is it for the base of a toilet bowl?

If you will be working on a bigger floor area and bigger tiles, it is best to buy a bigger tile cutter. This will save you more time because larger tile cutter means more tiles generated. But that is not the real catch here. Most importantly, if you cannot cut the tile in one pass, then your tile cutter is probably too small.

Chances are, you will just ruin the edges of your tiles if you finish cutting it up in two passes. Tiles with uneven edges will fit badly and obtain cracks. Furthermore, it can also cause you harm. The less dust or debris generated, the better.

3. Your budget and preference

At the end of the day, your budget and preference would still decide which cutter you would buy. Good quality manual tile cutters don’t have to be expensive. In fact, you can even get good bargains for as low $30 to $40.

However, the prices will vary depending on the blade. What the material/type of the blade is and how long it is would define whether its price is going to be cheaper or more expensive.

But then, it is also important to note that hiring a tile contractor per day might cost you more if the floor area is big. This is the reason it is a good idea to have your tile cutter at home. Treat it as a long term investment!

Tile cutters which are durable and easy to figure out especially for beginners or non-professionals might just get the job done.

4. Type of Tile Cutter

There are two kinds of tile cutter: the manual tile cutter and the motorized tile cutter. Naturally, smaller jobs would do fine with manual tile cutters. Manual tile cutters are the cheapest ones you can buy out there.

These manual tile cutters make use of a sharp tungsten carbide wheel to press against the tile. Tiles under 30 inches would get a precise cut in one pass.

Unfortunately, for bigger jobs, you might need the motorized tile cutter.

Heavy and big machines are powerful. Therefore, they are more expensive but can get the job done at a much more precise and faster pace. They also come in other unit types fit for varying jobs.

Motorized tile cutters come in smaller and lighter bench type units as well as the heavier and larger saws. However, all motorized cutters need water to cool down the blades as they cut. This is because they heat faster and would need cooling to retain their sharpness.

Do note that there are still different types of tile cutters. There ar tile nippers, saws, cutters among all others. Make sure to know what your job needs the most and take it from there.

As you try to find the best tile cutter for your home or any job at all, you might find even more things to consider when buying. However, when it is time for you to buy one, the ones listed here are just some of the most important things to consider.


#1 SKIL 3540-02 7-Inch Wet Tile Saw

SKIL’s Wet Tile Saw claims that it makes use of corrosive resistant stainless steel that can support 12 by 12 inches tiles. Buying the set would include (1) SKIL 3540 7-Inch Wet Tile Saw, (1) 7-inch Diamond Blade, (1) Blade Guard and Blade Wrenches.

It also features an adjustable rip fence with miter gauge to deliver more accurate, straight and miter cuts. Its built-in Blade cooling water reservoir will help you keep the blade cool with little to no effort while minimizing dust or debris.


  • SKIL offers a three-year limited warranty.
  • Just register your product within 30 days of purchase.
  • It is easy to work with, even for non-professionals.
  • It is cheaper compared to other brands.
  • You can also do 45-degree angles cuts other than straight cuts.
  • Not only straight or diagonal cuts, but this tile cutter also delivers excellent and precise 45-degree angle cuts. This feature is not usually present among all tile cutters.


  • Longer tiles might encounter problems.
  • It is mostly meant for 12-inch tiles.
  • The water tank is a bit small and might cause dripping or water running out.
  • Since the water tank is small, you might end up refilling it over and over. As for the dripping, it might cause the water to trickle on your workbench or some other places where it should not.

#2 Brutus 10800 27-Inch Rip and 20-Inch Diagonal Professional Porcelain Tile Cutter

The Brutus Professional Porcelain Tile Cutter, of course, cuts through porcelain and ceramic tiles with ease. It is best used for tiles up to 27 inches or 20 inches diagonally. It makes use of die-cast aluminum alloy base with heavy-duty rubber pads.

Its cutting wheel, on the other hand, is made of Titanium-coated tungsten carbide which is replaceable. Finally, its high leverage bicycle grip handle is designed to give you ease in cutting.


  • Scoring wheels are replaceable.
  • This will make it easier for you to replace dull scoring wheels.
  • It is a very sturdy and heavy duty equipment.
  • This makes it durable enough, even for long times of usage.
  • You can adjust the wheel to four different heights.
  • This will make it easier for you to snap cut a tile.


  • It can be pretty heavy to carry around.
  • This comes naturally with powerful tile cutters.
  • It does not come with a carrying case.

#3 QEP 10900Q 35-Inch Manual Tile Cutter

Finally, QEP’s 10900Q 35 inch Manual Tile Cutter is meant for tiles that are 35 inches or 24 inches diagonally. It comes with a measurement guide that aligns tiles for accurately cutting straight or even diagonal lines. It has a wide aluminum alloy base which delivers stability.

The scoring wheel is a ⅞ inch titanium-coated tungsten-carbide. Finally, it claims an easy clean mechanism. Just simply wash it with compressed air or soap and water if needed.


  • It is very light and easy to move.
  • Easy to learn how to use it even for beginners or non-professionals.
  • It can cut more length than what’s advertised and still deliver a good performance.


  • It does not have any solid warranty or operating procedures on how to claim warranty.
  • You might have a hard time cutting tiles in U or L shapes.
  • It works best with straight, diagonal or angled shape of tiles.

#4 QEP 10214Q 14 in. Rip Ceramic Tile Cutter

The QEP makes our second appearance in this list with a ½ inch cutting wheel. This handheld tool can cut up to 14 square inches, On the other hand, it cuts 10 inches diagonally during half an inch in thickness. The QEP 10214Q is best used in cutting ceramic or porcelain tiles.

The cutting wheel of the QEP 10214Q makes cutting much more efficient and faster. This is done through the padded-handle that’s also engineered to be of high-leverage.

On the other hand, the blade that the QEP uses is a tungsten carbide cutting wheel for maximum cutting power.


  • Comes with an adjustable rip guider.
  • This further helps you to cut tiles in a faster and easier manner.
  • Replaceable blades.
  • Should your blades be dull, you can replace it with another product of the QEP that is sold separately.
  • Rubber pads prevent unwanted shiftiness as you cut.
  • Steel rails are made from dual chrome.
  • This feature allows for smoother scoring on your tiles.
  • Features a rubber padded aluminum breaker bar that prevents your tiles from getting damaged


  • It’s not ideal for cutting tiles with bigger sizes.
  • Be careful with the rails because it can bend

#5 Chicago Electrical Power Tools 2.5 Horsepower 10″ Industrial Tile

Last on the list is Chicago Electrical Power Tools’ dual industrial tile and brick cutter. This heavy duty tool allows you to cut through thick slabs of tile and brick. This is made possible by the adjustable cutting head that let’s you cut through tiles and bricks going up to 3 ½ inches in thickness.

Moreover, the blade has a 24-inch cutting capacity powered by a dual capacitor motor. The motor features thermal overload protection along with sealed bearings for maximum durability and safety.


  • Versatile head pivots.
  • Allows you to cut at an angle of 22.5 and 45 degrees when doing bevel cuts.
  • Heavy duty steel frame○ Oversized frame that comes with a precision bar system.
  • This system offers you smoother and more efficient operation.
  • Industrial cutting blade.
  • The blade is incredibly powerful, lives up to the “industrial” label considering it’s also fit for wider construction work


  • Can be quite heavy for home use.
  • You could have problems with the water pump


A lot of things can go wrong when buying a tile cutter. It can ruin the project you’re doing and thus, ruin the flooring and overall design of your house. This is the reason it’s important to remember that tile cutters must be efficient and precise in their cutting. Not to mention, it should be durable and safe.

With all these in mind, the winner of this round is the Brutus 10800. You won’t find many problems when it comes to this heavy duty cutter. It’s precision and cutting power wins over than the other ones we listed. If you’re looking to overlook its heavy weight, then it’ll be a great product for cutting your tiles.

We will be happy to hear your thoughts

Leave a reply